| 160 |
GUN - OIL SERVICING FOR SKYDROL OR HYJET FLUIDS FOR AIRCRAFT HYDRAULIC SYSTEMS |
| 7011 |
Cart - Servicing, Engine Oil |
| 050-1125-12C47B |
Socket - Tire Pressure Sensor |
| 15F2342 |
TOWBAR - WITH WHEELS AND HYDRAULICS. |
| 160-3 |
DISPENSER - SKYDROL |
| 31440-521 |
NET - CARGO: -511 88 IN. X 125 IN. X 64 IN HIGH |
| 31831-531 |
NET - CARGO: 88 IN./ 96 IN. X 125 IN. X 96 IN HIGH 88 X 125 - NAS3610-2AIN ; 96 X 125 - NAS3610-2M21 |
| 32558-511 |
CARGO NET - 60.4" X 125" |
| 373RB |
ADAPTER - HYDRAULIC FLUID |
| 5253-3 |
Drive tool (for Alemite Type 1728B lubrication fittings) |
| 5254-1 |
Drive Tool - 5254-1 (for Alemite 1646B and 1992B lubrication angle fittings) |
| A27088-18 |
Link - Dummy, Aileron Trim Actuator |
| A32080-1 |
Disconnect - Brake, Flight Dispatch (***FLYAWAY***) |
| EX370-2 |
ADAPTER - SQUARE DRIVE, 1/4" HEX TO 3/8" MALE (ALT CARGO DOOR OPERATION) |
| G07004-1 |
Equipment - Jacking, Main Landing Gear Axle (Emergency Conditions) |
| G24016 |
DISPATCH EQUIPMENT - GENX-2B ENGINE IDG (INTEGRATED DRIVE GENERATOR) ******* TEMPORARY NOTE: DRAWING WILL BE RELEASED IN OCTOBER, 2010 ******* |
| G29013 |
Kit - Dispatch, GENX-2B, With Engine Driven Hydraulic Pump Removed |
| G32007-7 |
PROECTOR-AXLE PROTECTOR |
| G32008-1 |
PROTECTOR - THREAD, AXLE-MAIN & NOSE LANDING GEAR |
| G32039-25 |
Equipment - Wrench, MLG Wheel Retaining Nut |
| G32045-1 |
Equipment - Puller, Main Landing Gear Brake |
| G32048-1 |
Lock Assembly - Body Landing Gear Door (Flyaway Equipment) |
| G32049-1 |
Lock Assembly - Wing Landing Gear Door (Flyaway Equipment) |
| G32051-1 |
Lock - Handle, ***SAFETY*** Main Landing Gear Door Ground Release |
| G38004-13 |
Equipment - Removal, Vacuum Lavatory System Blockage |
| G38006-1 |
Equipment - Removal, Vacuum Waste System Blockage |
| G45001-1 |
Laptop - Maintenance |
| G49006-17 |
Kit - Dispatch, with APU Removed from Airplane |
| G49010-1 |
Link - Replacement, APU Air Inlet Door Actuator **Dispatch Tool** |
| G-59 |
Sling - Hot Brake, 6 Foot Mesh Length, 6 Inch Mesh Width |
| G71037-108 |
Engine Change Kit - GEnx-2B |
| G71042-1 |
Hoist Equipment - Engine Mount, Fwd and Aft |
| G71043-1 |
Sling - Fan Cowl, GENX-2B Engine |
| IA3202 |
ADAPTER, BRAKE INSTALLATION AND REMOVAL |
| MIT65B80430 |
Extension - Alternate Drive, Nose Door Lift Actuator |
| RDS1001 |
RAPID DESEALING SYSTEM |
| RCF508 |
KIT - HIGH TEMPERATURE SEAL (747 AIRPLANE). QUOTE FOR COMPLETE UNIT 508XXX (508747 ASSEMBLY), WHICH INCLUDES 508 KIT (BRASS & SEAL) AND 508-5S KIT (5 SEALS ONLY) |
| S-4933959-531 |
LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 CIRCUIT BREAKER LOCK. |
| SCTD0001 |
WRENCH - TORQUE 20-150 IN-LBS |
| TBM14M |
CRIMP TOOL - 14 TON, HYDRAULIC TOOL NOTE: CONTAINS HYDRAULIC PUMP, INTERCONNECT HOSE, DIES AND HEAD/CYLINDER PARTS |
| TR31/1 |
ONE CHANNEL RIGMASTER PROTRACTOR SYSTEM (ECONOMY VERSION OF THE TR60-1) |
| TR60-1 |
RIGMASTER, ELECTRONIC PROTRACTOR KIT. |
| WT111M |
PLIERS - CRIMPER, CABLE FERRULE |
| 4777 |
SEMI-AUTOMATIC ROLLER SWAGE MACHINE (1/4" TO 1 1/2" TUBE SIZE) |
| 6777 |
SEMI-AUTOMATIC ROLLER SWAGE MACHINE (1/4" TO 1 1/2" TUBE SIZE) |
| 8306 |
KIT - RECORDER, VACUUM |
| 8601 |
KIT - COMPOSITE REPAIR TOOL, FIELD REPAIR |
| 8777 |
SEMI-AUTOMATIC ROLLER SWAGE MACHINE (1/4" TO 5.0" TUBE SIZE) |
| 50445 |
Extractor - Lens Module, Mode Select Switch |
| 247001 |
METER - BONDING NOTE: FOR NON-EXPLOSION HAZARD & FUEL VAPOR AREAS & ON-AIRPLANE |
| 476609 |
KIT - CALIBRATION, GAS BOTTLE |
| 508747 |
Adapter - Probe Pitot Static (for probes with both extended and non-extended struts) |
| 4065501 |
Weight and Balance Tool - In-Axle Mount Installation |
| 0WB910825-01 |
WORK BOX |
| 1006SA18-XXXX |
CART - PORTABLE HYDRAULIC, SYSTEM TEST, 3000 PSI, 50 GPM (XXXX = OPTIONS REQUIRED) |
| 101-AC9 |
Breakout Box Eqpt - Position Sensors, Flt Ctrl Rigging (see Dwg A27063 for selecting applicable cable(s)) |
| 11C3414P01 |
KIT-BORESCOPE, BLENDING |
| 11C3479G01 |
ADAPTER - VSV/VBV |
| 11C4293P01 |
PROTECTIVE COVER - TURBINE REAR FRAME (TRF) OPENING |
| 11C4297G01 |
Cover - Fuel Nozzle Pad |
